1.

Introduction and Purpose.  This National Account Agreement (this “Agreement”) is between Capstone, a Delaware corporation, located at 16640 Stagg St., Van Nuys, California 91406, and Purchaser, Capstone Engineered Solutions, a California Corporation, located at 27812 Pollensa, Mission Viejo, CA 92692 and is made as of this 20th day of May, 2022 (the “Effective Date”).  Capstone and Purchaser may also be referenced herein individually as a "Party" and collectively as "Parties”.

1.1

Capstone manufactures MicroTurbine^TM generator systems and accessories that can be used for electric power generation. Capstone also manufactures and sells replacement, maintenance or spare parts intended for use in the Products (‘Parts”).

1.2

Purchaser desires to purchase certain products from Capstone as set forth in Exhibit 1.2 (“Products”) for its own operation to provide energy as a service, globally and for resale as part of an energy solution, and perform services (as described in Section 4.2)  on Products.

2.

Term. This Agreement will commence on the Effective Date and shall continue for Sixty (60) months unless terminated earlier in accordance with its terms.  Thereafter, this Agreement will automatically for an additional  Sixty (60) month periods unless Either Party provides the other Party with written notice of its intention not to renew this Agreement no later than one-hundred and eighty (180) calendar days prior to the end of the then current term.  

3.

Capstone’s Rights and Responsibilities.  

3.1

Sale and Supply of Products and Parts.  Capstone agrees to sell Products and Parts to Purchaser for its own use and operation, for purposes of resale to End Users or as part of an energy solution.  Capstone will use reasonable efforts to supply Products and Parts ordered by Purchaser in the quantities and at the times mutually agreed between Capstone and Purchaser and under the terms and conditions set forth in this Agreement.  

3.2

Changes to the Products or Parts.  Capstone may change the design, materials and means of manufacture, or otherwise modify, discontinue or limit production of the Products or Parts.  Capstone reserves the right from time to time to allocate, terminate or limit deliveries of any Products or Parts.

4.

Purchaser’s Rights and Responsibilities.  

4.1

LEFT INTENTIONALLY BLANK

4.2

Services.  For Products that it owns and operates, Purchaser will establish a plan for the servicing of the Products, either by Capstone Factory Services (“CFS”) or by Purchaser or an end user that has agreed to Capstone’s End User Terms and Conditions (“End User”) after it successfully completes Capstone’s Authorized Service Provider (“ASP”) training.  In no event will Purchaser allow any party engaged by Purchaser to perform any of the functions of an ASP without successfully completing the applicable Capstone training, individually entering into an agreement with Capstone relating to such training, and maintaining his or her certification in accordance with requirements determined by Capstone.  Purchaser will make reasonable efforts to enter into Capstone’s Service Agreement for Services performed on the Products.  

4.2.1

Application Engineering Services.  Purchaser agrees to provide all engineering, design, and planning required for the installation of the Products and for identifying the appropriate application(“Application Engineering”).  Purchaser may engage a qualified third party to perform Application Engineering on its behalf, but Purchaser must ensure that the Application Engineering complies with Capstone’s specifications, and Purchaser will bear all responsibility and liability arising from the performance by Purchaser or third party engaged by Purchaser for the Application Engineering. Purchaser

4.2.2

Installation Services.  Purchaser agrees to coordinate and facilitate the services of a Capstone ASP to direct the installation ("Installation") of the Products and to be responsible for all other labor, materials, equipment, supplies and permits associated with such Installation. Purchaser may also perform Installations for its own Products.  Purchaser will ensure that all Products are installed in accordance with Capstone’s approved practices and procedures, in accordance with all applicable codes and requirements, laws and union regulations, and are operational as a precondition to the applicability of Capstone's warranty.  

4.2.3

Commissioning Services.  Purchaser agrees to be responsible for commissioning of the Products, and for all other labor, materials, equipment, supplies and permits associated with such Commissioning.  “Commissioning” includes inspection of the existing installation, making or recommending any necessary adjustments to the existing installation, receiving or ensuring the End User receives operator training based on the Capstone Operations Manual, starting up the Product, and completing the then current Capstone commissioning checklist (“Commissioning Checklist”).  Purchaser will ensure that all Products are commissioned in accordance with Capstone’s approved practices and procedures and Commissioning Checklist as a precondition to the applicability of Capstone’s warranty.  Purchaser will submit a completed Commissioning Checklist to Capstone within fifteen (15) days of Commissioning.  

4.2.4

Warranty Services.  Purchaser will perform warranty service and provide warranty parts (“Warranty Services”) consistent with Capstone's Warranties (as defined in Section 6) and Warranty policy and procedures in effect from time to time.  Purchaser will make reasonable efforts to determine whether it or the End User has a valid claim under the Warranty and to identify and replace malfunctioning Parts covered by the Warranty promptly and efficiently in accordance with both the Warranties and Capstone’s policies, procedures, manuals, technical service instructions and guidelines in effect from time to time.  Capstone will retain the discretion to determine whether Purchaser or End User has a valid claim under the Warranty.  Purchaser agrees to use only Parts authorized by Capstone, unless Capstone agrees otherwise in writing.  Whenever possible, Purchaser agrees to use Parts that are remanufactured by Capstone for repairs covered by the Warranty. Purchaser will not recondition or retrofit any Product or Part and will follow Capstone’s then current warranty reimbursement procedure (“Warranty Reimbursement Procedure”) with respect to defective Products and Parts.  Purchaser will keep all defective Products and Parts in a central location for a reasonable period of time, not to exceed six months from the date of the removal of such Products and Parts, for Capstone's inspection and, upon request from Capstone and at Capstone’s expense, will promptly return some or all such defective Products and Parts to Capstone.  Any such returned Products and/or Parts will become the property of Capstone.  Purchaser will not instruct an End User to return any Product or Part directly to Capstone, and Purchaser will not do so itself.  Purchaser will have the right and obligation to provide Warranty Services for all Products that it purchases.  

4.2.5

Maintenance and Repair Services.  Purchaser will perform maintenance service, parts support, service after warranty, FPP, and other maintenance or repair operations as may be necessary to ensure proper and efficient operation of the Products (“Maintenance and Repair Services”).  Purchaser agrees to perform the Maintenance and Repair Services in compliance with Capstone’s policies, procedures and manuals in effect from time to time.  The provision of Parts and labor that are not covered by Warranty will be performed on a contract or time and materials basis. Purchaser will use only Parts authorized by Capstone, unless Capstone agrees otherwise in writing.  Purchaser will provide Maintenance and Repair Services for all Products that it purchases.  

4.2.6

Call Center Services.  Purchaser will provide call center services twenty-four (24) hours per day and seven (7) days per week and dispatch field technicians to the extent required.  Purchaser agrees to maintain a record of reported site events, commissioned equipment configurations (including serial numbers of original and replacement Parts) and field modifications installed on contracted systems by Purchaser.  Prior to contacting Capstone’s technical support engineers, Purchaser agrees to (i) act as the primary interface through direct communication with End Users concerning problems, defects, and failures related to the Products; (ii) search Purchaser’s problem database for known problems and provide existing corrections, fixes, and directions for corrective action; and (iii) use reasonable best efforts to accomplish problem determination, isolate any problem to a specific component, and report and document such problems.

4.3

Exchange and Provision of Information.

4.3.1

Warranty Information.  Upon notification to Purchaser that Capstone has received and accepted a completed Commissioning Checklist, the Capstone warranty on the Product will transfer from Purchaser to the End User (if Purchaser is not the End User).  Purchaser will inform the End User that in order to maintain warranty coverage, all service and maintenance, including warranty services, parts support, and other maintenance or repair operations conducted on End User’s Products must be performed and provided by CFS, Purchaser, or an ASC.  

4.3.2

Safety Notices and Operating Instructions.  Purchaser will provide the End User with all safety notices, operating instructions, and service bulletins for the Products issued by Capstone, including any updates, modifications or revisions to the safety notices, operating instructions, and service bulletins.

4.3.3

Remote Monitoring Information.  Purchaser will inform End Users that every MicroTurbineÔ includes software and hardware which allow for the remote monitoring of performance of the Product and collection of information related to the Product.  

4.3.4

End User License.  Purchaser agrees to include Capstone’s “End User License” in each agreement for sale of the Products entered into by Purchaser and End Users.  Purchaser shall furnish a copy of such End User License to the End User upon delivery or Commissioning of each Product.  Purchaser acknowledges that the delivery to End User of an End User License for each sale, is a material obligation under this Agreement.  Capstone’s End User License in effect on the Effective Date is attached hereto as Exhibit 4.3.4 to this Agreement.  

4.3.5

Information to Purchaser Personnel.  Purchaser agrees to provide all parties it engages with product and service bulletins prepared by Capstone within twenty-four (24) hours of receipt by Purchaser.  Purchaser will notify Capstone if any bulletin is unclear or if Purchaser or requires further clarification.  Purchaser will ensure that all parties it engages are informed and up to date with respect to Capstone service bulletins.  Purchaser will also ensure that any action described or required by a service bulletin is performed on a timely basis by parties it engages on all Products sold by Purchaser.

4.3.6

Information to Capstone.  Purchaser will provide Capstone with: (i) the location and use of each Product that is Commissioned by Purchaser; (ii) field service reports in accordance with Capstone’s then current work instructions; and (iii) data collection services in the form of field service reports, Commissioning Checklists, warranty claims, and information collected in accordance with Section 4.2.4 and/or 4.2.6 of this Agreement.

4.4

Business Practices.

4.4.1

Training.  Purchaser agrees to require parties it engages to participate in Capstone training in order to become knowledgeable about the Products, Parts and Services.  Purchaser will pay the course fee and all travel, lodging, and related costs for sending personnel to attend such courses.  At Purchaser's request, Capstone will send Capstone personnel to present training courses at Purchaser’s location for parties engaged by Purchaser, provided that Purchaser will pay all travel, lodging, and related costs, including the course fee.

4.4.2

Adequate Facilities, Staff, Equipment and Parts.  Purchaser will provide and maintain adequate service facilities, vehicles, tools, and a staff of trained service personnel in order to provide Services in a professional and timely manner.  Purchaser agrees to purchase and maintain a sufficient inventory of Parts as recommended by Capstone’s then current uniform parts inventory stocking guidelines (the “Stocking Guidelines”) in effect from time to time and based upon Purchaser’s field population of Products to be serviced.  Capstone will replace any Parts on the Stocking Guidelines that become obsolete, however, if Purchaser decides to stock a Part that is not on the Stocking Guideline or to stock a quantity of Parts in excess of the Stocking Guidelines and such Parts become obsolete, Capstone will have no obligation to replace them.  

4.4.3

Professional Standards.  Purchaser agrees to ensure that all parties it engages comply with professional standards of conduct typical of a well run business in order to enhance and support the reputation and goodwill of Capstone and its Products and Parts.  If, for any reason, Purchaser is unwilling, unable to or incapable of performing any of its obligations under this Agreement and Capstone has to act in order to ensure performance of its Products, whether or not Capstone terminates this Agreement as a result thereof, Purchaser shall reimburse Capstone for any and all reasonable costs or expenses incurred.  Before taking remedial action under this Section 3.5.3, Capstone agrees to provide written notice to Purchaser and to provide Purchaser with an opportunity to cure its failure to perform.  Such cure period will not exceed seven (7) days for Products that have been commissioned and are already in service or thirty (30) days for Products not yet commissioned.

4.4.4

Insurance.  Purchaser will secure and maintain commercial general liability insurance, covering Purchaser and Purchaser’s employees, with an admitted carrier (licensed to do business in the state in which Purchaser maintains its principal place of business) and with a carrier having at least an “A” BEST rating (a “Permitted Carrier”).  Subject to increases that may be necessary due to End User requirements and usual and customary business practices, which may impact the following, such policies will include: (1) commercial general liability; (2) auto liability; (3) umbrella liability; (4) property; (5) professional liability; and (6) workers’ compensation insurance (which is an actual workers’ compensation policy) each with a Permitted Carrier and at limits no less than those described in Exhibit 4.4.4 to this Agreement.  No coverage of any kind will include exclusions with respect to microturbines and associated parts and accessories.  Such coverage will be primary and non-contributory.  The Commercial General Liability policy will include Capstone as an additional insured.  All policies will afford a thirty (30) calendar day prior written notice of cancellation, reduction of coverage, change of terms and conditions and/or renewals and all policies will include a waiver of subrogation by the carrier in favor of Capstone.  Periods for such coverage will be concurrent with all underlying coverage. Coverage will be afforded using the same policy form as all underlying liability coverage.  Purchaser will annually provide Capstone a certificate of insurance evidencing such coverage.  All coverage will be on either an occurrence basis or a claims made basis.  If the coverage is on a claims made basis, Purchaser hereby agrees that prior to the effective date of termination of Purchaser’s current insurance coverage, Purchaser will either procure a replacement policy having a retroactive date no later than the Effective Date of this Agreement or purchase unlimited tail coverage in the amounts required in this Exhibit 4.4.4 for all claims arising out of incidents occurring prior to termination of Purchaser’s current coverage or prior to termination of this Agreement and provide Capstone a certificate of insurance evidencing such coverage.  The total premium costs for such tail coverage will be borne by Purchaser.  

4.4.5

Operations and Expenses.  Unless otherwise expressly set forth in this Agreement, Purchaser is responsible for all of its own expenses and parties it engages in performance of its obligations under this Agreement.  Purchaser will provide such office space and facilities, and hire and train such personnel, as may be required to carry out its obligations under this Agreement.  Purchaser agrees that it will incur no expense chargeable to Capstone, except as may be specifically authorized in advance in writing in each case by Capstone.  

5.0

Orders, Pricing, Payment

5.1

Customer Relations Management and Communications Tool; Annual Forecasts.  Beginning 30 (30) days from the Effective Date, Purchaser will utilize Capstone’s Customer Relations Management (“CRM”) system through Salesforce.com On an annual basis at the beginning of each of Capstone’s fiscal years, Purchaser shall provide good faith projections of the sale of Products for the following twelve months. Purchaser’s non-binding forecasts will reflect Purchaser’s good faith expectations of total End User demand, and Purchaser will act in a commercially reasonable manner in developing its forecasts to avoid creating production capacity problems for Capstone.

5.8

Compensation for Warranty Repairs; Service Parts. Capstone will compensate Purchaser for services associated with repairs covered by the Warranties upon receipt and approval of a valid warranty claim form per Capstone’s Warranty Reimbursement Procedure.  In order to qualify for compensation, Purchaser must: (i) be current on all payments owed to Capstone, (ii) provide Capstone with written notice of claims covered by the Warranty within thirty (30) calendar days after the claimed warranty event, and (iii) must provide proof of purchase of the Part for which End User seeks coverage under the Warranty.  Capstone will pay Purchaser for its labor based on the “Warranty Reimbursement Rate” (attached as Exhibit 5.7) and based on Capstone’s then current Warranty Service Flat Rate Schedule for the removal and replacement of serviceable components for removal and replacement of serviceable components.  Capstone will reimburse Purchaser for the price of Parts owned by Purchaser at the time of the failure and used by Purchaser to provide Services covered by the Warranties at the rate of ten percent (10%) below the then current recommend list price.  However, in the event that Purchaser did not stock the Part required for a warranty repair, such Part will be provided by Capstone with no compensation to Purchaser for the Part.  Capstone reserves the right to verify any claims that a Product requires service under the Warranties. If Capstone determines that any Product or Part is free from material defects or otherwise conforms to Capstone’s obligations and Warranties under this Agreement, Purchaser will pay all reasonable costs of such determination, including any labor, travel, transportation and shipping expenses.  

6.1

Target Shipment Date.  Upon issuance of the Order Acknowledgement, Capstone will establish a target date or range of dates when the Order will be ready for shipment (“Target Shipment Date”).  If Capstone and Purchaser agree, Capstone may ship ahead of the Target Shipment Date. Capstone will inform Purchaser of any changes to current lead times or to the acknowledged Target Shipment Date as information becomes available.  Notwithstanding the issuance of an Order Acknowledgement, Capstone reserves the right, in its sole discretion, to refuse to ship an Order if Purchaser is in breach of payment terms or any other material provision of this Agreement and such breach has not been cured (if a cure period is contemplated by this Agreement for such a breach).

6.2

Shipment.  All shipments will be made EXW Capstone’s facility (as EXW is defined in Incoterms 2010).  As a courtesy to Purchaser, Capstone may arrange for shipment of the Order on its preferred carrier, unless a carrier is specified by Purchaser in the Ordering Request.  For Orders not picked up within one (1) week of notification that the Orders are ready for shipment, Capstone may, at its sole option, ship the Orders via its preferred carrier to the ship-to address specified in the Ordering Request at Purchaser’s expense.  All transportation, insurance, freight, shipping and handling costs, fees, duties, or taxes incurred by Capstone will be invoiced to Purchaser either with the delivery/shipment invoice or at the end of each calendar month. Title will pass to Purchaser on shipment.  Transportation insurance coverage procured by either Party will, at a minimum, cover one hundred and ten percent (110%) of the total value of the Order.

6.3

Shipment Changes.  Requests to extend the Target Shipment Date will be considered on a case-by-case basis, but the Order Price may be affected if a price increase occurs between the original and the new shipment date.  

7.0

Representations and Warranties; End User License.

7.1

Purchaser represents, warrants, and covenants that: (i) it is qualified to do business in every jurisdiction in which such qualification is necessary and has the right, power, and authority to enter into this Agreement and to perform fully its obligations hereunder; (ii) the entering into of this Agreement by it does not violate any agreement existing between it and any other person or entity; (iii) it has obtained or will obtain all licenses and permits necessary for it to perform its obligations under this Agreement; and (iv) all information provided by Purchaser to Capstone concerning the intended use of the Products and Parts and its ability to pay for the Products and parts is complete and accurate. Purchaser acknowledges that compliance with this Section 7.1 is a material obligation under this Agreement.

7.2

End User License. Purchaser acknowledges and agrees that the Products are sold subject to the “End User License” as set for in Exhibit 7.2 of this Agreement. Purchaser agrees to be bound by the terms as set forth in the End User License.  Purchaser acknowledges and agrees that every Capstone microturbine includes software and hardware which allow for the remote monitoring of performance of the Product and collection of information related to the Product and that Capstone will regularly utilize the remote monitoring software and hardware to access and obtain information related to the Product and/or its use. Purchaser will not impeded or deny remote monitoring by Capstone under any circumstances. Purchaser acknowledges that compliance with this Section 7.2 is a material obligation under this Agreement.

8.

Capstone’s Warranties.  Capstone’s warranties in effect on the Effective Date are attached as Exhibit 8 to this Agreement (“Warranties”).

8.1

Transfer of Warranties.  Capstone provides the Warranties to Purchaser.  Upon notification to Purchaser that both Capstone and End User (if applicable) have received and accepted a completed Commissioning Checklist, the then unexpired portion of the Warranties will transfer from Purchaser to End User (if applicable).  With the exception of this permitted transfer, the Warranties may not be sold or transferred to any other party.  The Warranties will not apply until an authorized party has completed Installation and Commissioning of the Product, completed Capstone’s Commissioning Checklist, and Purchaser has received notification that both Capstone and End User (if applicable) have received and accepted a completed Commissioning Checklist.  

8.2

Condition to Effectiveness of Warranties.  Among other conditions that may be specified in the Warranties, the Warranties shall only apply to a Product if: (a) the Installation was properly performed by an ASP; and (b) both Capstone and Purchaser and End User (if applicable) have accepted Capstone’s Commissioning Checklist completed by a party authorized by Capstone.  No Warranty will apply unless all service and maintenance, including warranty services, parts support, and other maintenance or repair operations conducted on any Products is performed and provided by Purchaser, an ASP, or CFS. No warranty shall apply if Purchaser repackages, or changes in any manner, the “as-shipped” configuration of any Product or Part without express written consent by Capstone.

8.3

Additional Warranties.  Capstone shall have no obligation with regard to any warranties given by third parties which are beyond the obligations provided in the Warranty for the applicable Product, Parts or Services.

8.4

Changes to Terms of Warranties.  Capstone may modify, change or revise the Warranties at any time upon notice to Purchaser, with such modifications, changes or revisions applicable for any Products or Parts that are ordered after the date of any such modification, change or revision. In such event, the modified warranties will apply only to orders not yet placed by the Purchaser.

8.5

Refurbishment of New Unused Products.  In the event that Installation and Commissioning are delayed and the applicable Warranties expire on any Products in Purchaser’s possession, Purchaser may have the Products refurbished by Capstone at Purchaser’s expense.  Once refurbishment is complete, the refurbished Products shall be covered by the Capstone Turbine Corporation New System Limited Warranty or the Capstone Turbine Corporation Signature Series New System Limited Warranty, as applicable, as if such refurbished Products were newly manufactured.

8.6

Exclusive Remedy.  Purchaser's and End User’s exclusive remedy shall be correction of nonconformities in the manner and for the time provided in the Warranties.  Performance by Capstone in the manner specified shall constitute fulfillment of all liabilities of Capstone (including any liability for direct, indirect, special, incidental or consequential damage) whether in warranty, contract, negligence, tort, strict liability, or otherwise with respect to any non-conformance of or non-conformity or deficiency in the Product supplied.

8.7

Conflicting Provisions.  The foregoing limitations of Capstone’s warranty obligations and Purchaser’s and End User remedies, as provided for in this Section 8, shall prevail over any conflicting or inconsistent provisions contained in any Ordering Request that may be issued pursuant thereto.

9.

Trademarks and Branding.  Capstone confirms and Purchaser acknowledges that Capstone is the owner of all right, title, and interest in and to the Capstone trademarks.  Purchaser shall have no ownership, right, title, or interest in and to the Capstone trademarks.  Purchaser will have the right, for so long as this Agreement remains in effect, to use the Capstone trademarks solely in marketing and renting Products and Parts under the terms and conditions of this Agreement and in accordance with Capstone’s specifications as to style, color, and typeface for the Capstone trademarks as specified in the Policy Manual.  Purchaser shall have no right to register any Capstone trademark and all good will in the Capstone trademarks shall inure to the sole benefit of Capstone.  Upon the termination of this Agreement, Purchaser shall take all action necessary to transfer and assign to Capstone or Capstone's nominee any right, title, or interest in or to any Capstone trademarks that Purchaser may have acquired in any manner as a result of the marketing or renting, of any Product or Part, and Purchaser shall cease using any Capstone trademarks.

10.1

Publicly held, its Annual Report will satisfy this requirement.  

10.2

Privately held, it will prepare/provide a consolidated financial statement (certified as true and correct by an authorized party of Purchaser) to Capstone’s Chief Financial Officer (“CFO”).

11.

Term and Termination.

11.2.1

Breach of any material term or condition of this Agreement;

11.2.2

Breach of any non-material term or condition of this Agreement that continues uncured for thirty (90) calendar days following written notice thereof;

11.2.3

Breach of the confidentiality or nondisclosure provisions contained in this Agreement, or the breach of any NDA (as defined below) by either Party or by the parties engaged by either Party;

11.2.4

Any attempted or actual transfer or assignment of this Agreement or any right or obligation hereunder, whether by operation of law, change of control or otherwise, without the prior written approval of the other Party;

11.2.5

Failure to pay when due any amount owed to the other Party that goes uncured more than 90 days;

11.2.6

Execution of an assignment for the benefit of creditors, or the commencement by or against a Party of voluntary or involuntary proceedings (which are not dismissed within sixty (60) calendar days) under any bankruptcy, reorganization, or similar laws of any jurisdiction, or if any order shall be made or any resolution passed for the winding up, liquidation or dissolution of the Party, if a receiver is appointed for it for all or substantially all of its assets, or if a substantial portion of its goods or properties shall be taken in execution;

11.2.7

The Party ceases to do business or otherwise terminates its business operations relevant to this Agreement;

11.2.8

Control of Purchaser is obtained directly by any competitor of Capstone who is engaged in the marketing, sale or service of products competing with Capstone Products;

11.2.9

The Party merges into any entity, or the Sale of a Controlling Stock Interest (as defined below) in the Party occurs, in each case other than in a transaction in which the person or persons controlling the surviving, continuing or acquiring person after the transaction is or are substantially identical to the person or persons controlling the Party before the transaction.  For purposes hereof, “Sale of a Controlling Stock Interest” means the acquisition by any “person” or “group” as such terms are defined under the Securities Exchange Act of 1934, of 50% or more of the voting securities of the Party; or

12.

Confidential Information and Intellectual Property.

12.1

Definitions. “Confidential Information” means any information disclosed by a Party hereto (the Disclosing Party”) to the other Party (the “Recipient”) or derived or learned as a result of the disclosure of Confidential Information or incident to the relationship governed by this Agreement, either directly or indirectly, in writing, orally or by inspection of tangible objects that relates to:

12.2

Confidential Information.  A Recipient shall not disclose or use Confidential Information of the Disclosing Party for any purpose other than expressly allowed under this Agreement and shall take all reasonable and prudent measures necessary to protect the Confidential Information of the Disclosing Party.  Each Recipient further acknowledges that, without limiting any other remedies available under this Agreement, any disclosure of the Disclosing Party’s Confidential Information in violation of this Agreement constitutes irreparable injury to the Disclosing Party that will entitle the Disclosing Party to injunctive relief.  To the extent that the Parties have entered into a nondisclosure agreement (“NDA”) prior to the execution of this Agreement, the terms of such NDA are incorporated by reference into this Agreement.  The terms of this Agreement shall prevail over any conflicting or inconsistent provisions contained in the NDA.  The Parties’ obligations under the foregoing provisions shall remain in effect and continue to bind the Parties for five (5) years after the expiration or earlier termination (for any reason) of this Agreement; provided, however, Recipient’s obligation to maintain the secrecy of Capstone’s trade secret information shall continue for so long as such information is entitled to trade secret protection under California law.  

12.3

Product Modification and Reverse Engineering.  Purchaser shall not in any manner, directly or through others, modify or disassemble for the purpose of reverse engineering any Products or Parts.

12.4

Ownership of Confidential Information, Intellectual Property Rights.  All Intellectual Property rights and Confidential Information relating to Products, Parts, and Services, and all other information provided by Capstone to Purchaser under this Agreement, shall remain the sole property of Capstone and shall be returned promptly to Capstone upon termination or expiration of this Agreement (alternatively, Purchaser may provide certification that such documents, copies thereof and notes and memoranda containing such Capstone Confidential Information have been destroyed such that no Capstone Confidential Information may be gleaned from them).

12.5

Third Party Obligations for Confidential Information, Intellectual Property Rights.  If Purchaser engages or uses any third party in the execution of any of its obligations under this Agreement, Purchaser shall cause each such third party to be bound by an enforceable written agreement, of which Capstone is expressly made a third party beneficiary, with terms and conditions protecting Capstone’s Intellectual Property and Confidential Information, and shielding Capstone from liabilities of all types, that are at least as stringent as those set forth in this Agreement.  Purchaser represents and warrants that each such written agreement, which does not include Capstone as a signatory party, shall be enforceable against the third party by Capstone.  

12.6

Ownership of Intellectual Property Rights for Development Efforts.  The Parties shall endeavor to establish their respective intellectual property rights prior to undertaking any development efforts. In the absence of such determination of rights, and subject to Section 12.4 above, the Parties shall jointly own any rights to new technology or to improvements to existing technology that result from any development efforts. The Parties shall cooperate to ensure protection of those rights, whether by patent, trade secret, trademark, copyright, or other such protection; provided, however, that in the event of any such rights that are jointly owned, neither Party shall be required to account to the other Party for any exploitation of those jointly owned rights.

12.7

Press Releases.  Press releases and other like publicity, which mentions this Agreement or the other Party by name, shall not be released without the prior written consent of the other Party, which consent will not be unreasonably withheld.  No such prior written consent shall be required if the foregoing information is enclosed in disclosure reports and filings which either Party is required to make as a matter of law.

13.

Compliance with Applicable Law.  Purchaser shall ensure that the Services and use of Products and/or Parts, comply with all applicable laws, rules, regulations and standards in jurisdictions in which they are being used. Purchaser shall obtain and maintain, at its sole expense, any and all certifications, licenses, other authorizations, ratings, approvals and interconnection arrangements required or advisable under the applicable laws and in all jurisdictions in connection with installation, commissioning and use of Products and/or Parts. Without limiting the generality of the foregoing, Purchaser shall supply and fit all signs and safety notices to the Products and Parts and

13.1

Improper Payments.  Purchase and Capstone represent and warrant that they have not made, or promised to make, any payment to any public official in violation of the United States Foreign Corrupt Practices Act or other applicable laws.  Purchaser and Capstone represent and warrant that they are aware of the applicable United States regulations governing bribery, agency, and government purchases and any other relevant regulations and that they shall comply with such rules and regulations.  Each Party agrees to indemnify and hold the other harmless from and against the consequences of a violation by it of this provision.

13.2

Export Regulations.  Purchase represents and warrants that it has and will comply in all material respects with all provisions of United States export regulations and laws.  Purchaser acknowledges that it has read and is familiar with these regulations and laws and will, for a period of at least two (2) years after the expiration or earlier termination of this Agreement, fully comply with all provisions of these regulations and shall permit Capstone’s representatives and/or representatives of the United States government to inspect all such records as may be required.  Purchaser agrees to provide Capstone, upon Capstone’s request, with copies of bills of lading and other shipping documentation in order to demonstrate Purchaser’s compliance with the foregoing.  Purchaser will obtain written assurance from End Users of the Products that they are not intended to be used for any purpose prohibited by United States export laws and regulations and will provide Capstone with such information and documentation as Capstone reasonably requests in order to verify that Purchaser’s export of the Products complies with applicable United States export regulations and laws

14.

DISCLAIMER.  EXCEPT AS SET FORTH IN Section 7.2 (PuRSUANT TO CAPSTONE’S END USER LICENSE) AND Section 8 (FOR THE WARRANTY GIVEN TO PURCHASER) NO OTHER WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY ARE GIVEN IN RESPECT OF PRODUCTS OR PARTS, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND ALL SUCH WARRANTIES HEREBY ARE EXPRESSLY DISCLAIMED.

15.

Intellectual Property Infringement Protection.  

15.1

Capstone, at its own expense, will defend or at its option settle, any claim, suit or proceeding brought against Purchaser, and pay any liabilities, damages and costs awarded in any such suit or proceeding, if the suit or proceeding is based on a claim that a Product or Part infringes any United States Intellectual Property right of any third party (other than those arising out of conditions described in Section 15.3).  Capstone shall have the liability expressed in this paragraph with respect to a claim that a Product or Part infringes any United States Intellectual Property right of any third party, provided that:

15.2

If a Product or Part is held, or believed by Capstone, to infringe any United States Intellectual Property right of a third party, Capstone shall have the sole option in its sole discretion and at its sole expense to:

15.3

In no event shall Capstone be liable for any claim of infringement, and Purchaser and End User agree to protect and defend Capstone in the same manner and extent that Capstone has agreed to defend Purchaser as set forth in Section 15.1, when such claim is based on the use of any Product or Part altered in whole or in part by Purchaser and/or its End User or used in connection with any equipment, process, software or technology other than that necessary for use of the Product or Part for the particular application as contemplated by the Capstone Operations Manual and all applicable specifications.

15.4

THE FOREGOING STATES THE EXCLUSIVE LIABILITY OF CAPSTONE FOR INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS UNDER THIS AGREEMENT, AND IS IN LIEU OF ALL WARRANTIES,

15.4

Purchaser agrees to provide the End User with the information contained in this Section.

16.

Limitation of Liability in General.  

16.1

Independent of, severable from, and to be enforced independently of any other enforceable or unenforceable provision of this Agreement, CAPSTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, PUNITIVE, OR EXEMPLARY DAMAGES OF ANY KIND; or for: LOST GOODWILL, LOST PROFITS, LOST BUSINESS, COST OF COVER OR OTHER INDIRECT ECONOMIC DAMAGES, AND FURTHER INCLUDING INJURY TO PROPERTY, WHETHER SUCH CLAIM IS BASED ON THEORIES OF CONTRACT, NEGLIGENCE, TORT (INCLUDING STRICT LIABILITY) OR OTHERWISE AS A RESULT OF BREACH OF ANY WARRANTY OR OTHER TERM OF THIS AGREEMENT, REGARDLESS OF WHETHER CAPSTONE WAS ADVISED, HAD OTHER REASON TO KNOW, OR IN FACT KNEW OF THE POSSIBILITY OF SUCH DAMAGES.

16.2

Capstone’s aggregate liability to Purchaser with respect to any claims which are permitted pursuant to this Agreement and are not otherwise disclaimed or limited pursuant to the terms of this Agreement shall in no event exceed in the aggregate the sales price to Purchaser of the individual Product or Part giving rise to the claim (as purchased pursuant to this Agreement), and any action related to this Agreement must be commenced within one (1) year after: (i) the date on which the cause of action accrues; or (ii) termination of this Agreement, whichever period shall expire first.

16.3

The above limitations of Capstone’s liability and exclusions of indirect, special, incidental or consequential damages, as provided for in Sections 16.1 and 16.2, shall prevail over any conflicting or inconsistent provisions contained in any of the documents comprising this Agreement and any Ordering Request that may be issued by Purchaser pursuant thereto, except to the extent that such provision further limits Capstone’s liability.

16.4

The rights, remedies and obligations of the Parties set forth in this Agreement, together with the attached exhibits specifically referenced in this Agreement, are the exclusive rights, remedies and obligations of the Parties hereunder and are in lieu of any other right, remedy, or obligation available at law or in equity.

18.

Dispute Resolution.  All disputes and claims for temporary or permanent redress or relief arising out of or with reference to this Agreement or any agreement or instrument expressly referenced herein or attached hereto as an exhibit and relating to the ownership, licensing, use, sublicensing, violation, infringement or performance hereunder with respect to Intellectual Property rights shall be brought by either Party in, and Capstone may bring an action for payment for Products or Parts sold to Purchaser in, a state or federal court in Los Angeles County, California.  The Parties submit to the foregoing jurisdiction of, and agree that the venue is proper in, these courts in any such legal action or proceeding as described above.  All other disputes, controversies, claims for temporary or permanent redress or relief arising out of or with reference to this Agreement or any agreement or instrument expressly referenced herein or attached hereto as an exhibit shall be settled by arbitration in Los Angeles, California by a panel of three arbitrators under the commercial arbitration rules of the American Arbitration Association.  Such arbitration shall be conducted by three (3) arbitrators, one (1) chosen promptly by Capstone, one (1) chosen promptly by Purchaser and a third, neutral arbitrator, selected promptly by the first two arbitrators.  The award of the arbitrators shall be final and binding and the Parties consent to the exclusive jurisdiction of any federal or state court in Los Angeles County for purposes of enforcing any decision of the arbitration panel.  Judgment on the arbitrators' award may be entered in any court having jurisdiction, provided that the arbitrators shall be bound by all provisions of this Agreement, including without limitation, Section 16 of this Agreement, and shall have no authority or power to enter an award which is in conflict with any of the provisions of this Agreement.  Any award which is in conflict with any of the provisions of this Agreement shall be null and void, and shall be vacated on the grounds that it exceeded the powers of the arbitrators.  By this Agreement the Parties do not intend to deprive any court of its jurisdiction to issue a pre-arbitral injunction, pre-arbitral attachment or other order in aid of arbitration proceedings and enforcement of

19.

Miscellaneous.

19.1

Governing Law.  This Agreement is governed by the laws of the State of California (including the California Uniform Commercial Code, as such laws are applied to contracts made and performed entirely within the State of California), without regard to California’s conflicts of laws provisions, and United States federal laws applicable to patents and trademarks.

19.2

Construction.  Throughout this Agreement, as the context requires: (i) the singular tense and number includes the plural, and the plural tense and number includes the singular; (ii) the past tense includes the present, and the present tense includes the past; and (iii) references to parties, sections, schedules, and exhibits mean the Parties, sections, schedules, and exhibits of and to this Agreement.

19.3

Headings. The section headings in this Agreement are inserted only as a matter of convenience, and in no way define, limit, extend, or interpret the scope of this Agreement or of any particular section.

19.4

Schedules and Exhibits.  If there is any conflict or inconsistency between the provisions set forth in this Agreement and the provisions set forth in any schedule or exhibit to this Agreement, to the extent possible such provisions will be interpreted in a manner so as to make them consistent. If it is not possible to interpret such provisions consistently, the provisions set forth in the body of this Agreement shall prevail.

19.5

Counterparts.  This Agreement may be executed and delivered in one (1) or more counterparts and by facsimile transmission, each of which shall be deemed an original, but all of which together shall constitute one and the same instrument.  

19.6

Amendments.  This Agreement shall not be modified, amended, or in any way altered except by an instrument in writing signed by the Parties hereto with the same formality as this Agreement.  

19.7

Assignment.  This Agreement may not be assigned by either Party hereto without the prior written consent of the other Party.  The Parties acknowledge that compliance with this Section 19.7 is a material obligation under this Agreement.

19.8

Successors and Assigns. All covenants, representations and warranties of the Parties contained herein shall be binding upon and inure to the benefit of their respective heirs, successors, and permitted assigns.

19.9

Severability.  If any provision of this Agreement or the terms and conditions set forth herein is declared or found to be illegal, unenforceable, or void, the remaining provisions of this Agreement shall remain in full force and effect, subject to the immediately following provisions.  In the event any provision of this Agreement is declared or found to be illegal, unenforceable or void, the Parties agree to negotiate in good faith a substitute provision that is legal and enforceable and is as nearly as possible consistent with the intentions underlying the original provision.  If the remainder of the Agreement is not materially affected by such declaration or finding and is capable of substantial performance, then such remainder will be enforced to the extent permitted by law.

19.10

Independent Review and Advice. Each Party hereto represents and warrants that it has carefully read this Agreement; including the schedules and exhibits hereto that each Party hereby executes this Agreement with full knowledge of the contents of the foregoing, the legal consequences thereof, and any and all rights which each may have with respect to one another; that each Party has had the opportunity to receive independent legal advice with respect to the matters set forth in this Agreement and with respect to the rights and asserted rights arising out of such matters, and that each Party is entering into this Agreement of its own free will. The Parties expressly agree that there are no expectations contrary to the Agreement, and no usage of trade or regular practice in the industry shall be used to modify any of the terms and provisions of the Agreement.

19.11

Entire and Sole Agreement.  This Agreement, together with the agreements incorporated herein by reference and the attached exhibits specifically referenced in this Agreement, constitutes the complete and exclusive statement of the mutual understanding of the Parties with respect to its subject matter.  This Agreement (i) is final and binding without right  to return  Products and/or Parts and (ii) other than any NDA, which is incorporated in this Agreement by reference, supersedes any and all prior or contemporaneous understandings, representations, or other communication between the Parties of any sort, whether written or oral, with respect to its subject matter.  The Parties agree that all Products and Parts furnished by Capstone shall be subject to this Agreement which may not be changed or waived except in writing signed by the Parties with the same formality as this Agreement. Any additional, inconsistent, or different terms and conditions

19.12

Force Majeure.  Each Party’s performance under this Agreement shall be suspended (other than the obligation to pay monies already due to either Party or becoming due as a result of filling orders placed and accepted) for so long as such performance is hindered or prevented by events or occurrences beyond its reasonable control (“Force Majeure”), such as, but not limited to, riots, labor disputes of a general nature, national or civil wars (declared or undeclared), insurrections, rebellions, terrorist acts, embargoes, civil disturbances, earthquakes, dispositions or orders of governmental authority (whether such authority be actual or assumed), acts of civil or military authority, fires, strikes, delays in transportation, inability to obtain necessary labor, manufacturing facilities or materials from usual sources and acts of God.  Any delays resulting from any such cause shall extend the time for performance correspondingly.  If a failure to perform results from a governmental law, rule, regulation, disposition, or order and the affected Party is unable to perform, after making reasonable efforts to comply with such law, rule, regulation, disposition or order, the matter shall be deemed a Force Majeure.  The limitations contained in Section 16.1 of this Agreement shall also apply.

19.13

Relationship of the Parties.  Nothing contained in this Agreement shall be construed as creating a joint venture, partnership, agency, franchisor, franchisee, or employment relationship between the Parties hereto nor shall either Party have the right, power, or authority to create any obligation or duty, express or implied, on behalf of the other Party.  The Parties shall not act or represent themselves, either directly or by implication, as an agent for the other Party and shall not attempt to create any obligation, or make any representation, warranty, or covenant that the other Party has not specifically authorized in working on behalf, or in the name, of the other Party.

19.14

No Third Party Beneficiaries.  Unless otherwise expressly provided, none of the provisions or terms of this Agreement are intended to confer to or benefit any person or entity other than the Parties to this Agreement any rights, remedies or other benefits under or by reason of this Agreement.

19.15

Notices.  All notices or other communications under this Agreement, shall be in writing, shall be sent by certified or registered air mail with postage prepaid, return receipt requested, by facsimile, e-mail, reputable overnight or other rapid courier with tracking capabilities, or by hand delivery; provided, however, that if a notice or other communication is sent via facsimile or e-mail, such notice or communication shall also be sent by one of the other means of transmittal (with the exception of facsimile or e-mail, as the case may be).  Such communications shall be deemed given and received upon delivery if sent by overnight courier or hand delivered, within three (3) business days of mailing, if sent by certified or registered mail, and within the time period set forth above for such method other than facsimile or e-mail if sent by facsimile or e-mail, and shall be addressed to the Parties at the address set below or such other addresses as the Parties may designate and provide notice of in writing from time to time in accordance with this Section 19.15.

19.17

Remedies. The election of one or more remedies, which are permitted by this Agreement, by either Party shall not constitute a waiver of the right by such Party to pursue any and all other available remedies.

CAPSTONE TURBINE CORPORATION

Capstone Engineered Solutions

1.

Commercial General Liability coverage on an occurrence basis for limits of $1,000,000 Combined Single Limit per occurrence and $2,000,000 aggregate. Such policy shall also contain a limit of $1,000,000 per occurrence for Personal Injury/Advertising Injury, and a separate Products Completed Operations aggregate of $2,000,000.

2.

Auto Liability for owned, non-owned and hired autos, for a limit of $1,000,000 Combined Single Limit.

3.

Umbrella liability limits of $10,000,000 per occurrence and annual aggregate with commercial general liability, automobile liability and employers’ liability scheduled on the policy.

4.

Property insurance covering the replacement cost of all property owned, leased or in Purchaser’s care, custody and/or control.

5.

Professional Liability coverage of $1,000,000 per occurrence or in the aggregate for those who perform Application Engineering Services.

6.

Workers’ Compensation statutory benefits for states in which Purchaser conducts business, including Employer’s Liability for limits of $1,000,000 for each accident, disease for each employee and disease for the policy limit.