Annual report pursuant to Section 13 and 15(d)

Summary of Significant Accounting Policies (Policies)

v3.21.1
Summary of Significant Accounting Policies (Policies)
12 Months Ended
Mar. 31, 2021
Summary of Significant Accounting Policies  
Cash Equivalents

Cash Equivalents  The Company considers only those investments that are highly liquid and readily convertible to cash with original maturities of three months or less at date of purchase as cash equivalents.

Fair Value of Financial Instruments

Fair Value of Financial Instruments  The carrying value of certain financial instruments, including cash equivalents, accounts receivable, accounts payable, revolving credit facility and notes payable approximate fair market value based on their short‑term nature. See Note 10—Fair Value Measurements, for disclosure regarding the fair value of other financial instruments.

Accounts Receivable

Accounts Receivable  Trade accounts receivable are recorded at the invoiced amount and are typically non‑interest bearing. The Company maintains allowances for estimated losses resulting from the inability of customers to make required payments and other accounts receivable allowances. Changes in the accounts receivable allowances are as follows (in thousands):

 

 

 

 

 

Balance, March 31, 2019

 

$

5,298

 

Reductions charged to costs and expenses

 

 

431

 

Bad debt write-off

 

 

(5,026)

 

Balance, March 31, 2020

 

$

703

 

Additions charged to costs and expenses

 

 

(228)

 

Bad debt write-off

 

 

(161)

 

Balance, March 31, 2021

 

$

314

 

 

Inventories

Inventories  The Company values inventories at the lower of cost (determined on a first in first out (“FIFO”) basis) or net realizable value. The composition of inventory is routinely evaluated to identify slow-moving, excess, obsolete or otherwise impaired inventories. Inventories identified as impaired are evaluated to determine if write-downs are required. Included in the assessment is a review for obsolescence as a result of engineering changes in the Company’s products. All inventories expected to be used in more than one year are classified as long-term.

Depreciation and Amortization

Depreciation and Amortization  Depreciation and amortization are provided for using the straight-line method over the estimated useful lives of the related assets, ranging from two to ten years. Leasehold improvements are amortized over the lease term or the estimated useful lives of the assets, whichever is shorter. Intangible assets that have finite useful lives are amortized over their estimated useful lives using the straight-line method.

Long-Lived Assets

Long-Lived Assets  The Company reviews the recoverability of long-lived assets, including intangible assets with finite lives, whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. If the expected future cash flows from the use of such assets (undiscounted and without interest charges) are less than the carrying value, the Company may be required to record a write‑down, which is determined based on the difference between the carrying value of the assets and their estimated fair value. The Company performed an analysis as of March 31, 2021 and determined that no impairment was necessary. See Note 5—Intangible Assets.

Deferred Revenue

Deferred Revenue  Deferred revenue consists of deferred product and service revenue and customer deposits. Deferred revenue will be recognized when earned in accordance with the Company’s revenue recognition policy. The Company has the right to retain all or part of customer deposits under certain conditions.

Revenue

Revenue  On April 1, 2018, the Company adopted the new revenue standard ASU 2014-09 and applied it to all contracts using the modified retrospective method. The Company determined there was no change in applying the new revenue standard, therefore no adjustment to the opening balance of accumulated deficit was needed.

The Company derives its revenues primarily from system sales, service contracts and professional services. Revenues are recognized when control of the systems and services is transferred to the Company’s customers in an amount that reflects the consideration it expects to be entitled to in exchange for those services.

The Company determines revenue recognition through the following steps:

·

Identification of the contract, or contracts, with a customer

·

Identification of the performance obligations in the contract

·

Determination of the transaction price

·

Allocation of the transaction price to the performance obligations in the contract

·

Recognition of revenue when, or as, the Company satisfies a performance obligation

The Company recognizes revenue when performance obligations identified under the terms of contracts with its customers are satisfied, which generally occurs, for systems, upon the transfer of control in accordance with the contractual terms and conditions of the sale. The majority of the Company’s revenue associated with systems is recognized at a point in time when the system is shipped to the customer. Revenue from service contracts and post-shipment performance obligations is recognized when or as those obligations are satisfied. The Company primarily offers assurance-type standard warranties that do not represent separate performance obligations and will separately offer and price extended warranties that are separate performance obligations for which the associated revenue is recognized over-time based on the extended warranty period. The Company records amounts billed to customers for reimbursement of shipping and handling costs within revenue. Shipping and handling costs associated with outbound freight after control over a system has transferred to a customer are accounted for as fulfillment costs and are included in cost of goods sold. Sales taxes and other usage-based taxes are excluded from revenue.

Comprehensive factory protection plan service contracts require payment at the beginning of the contract period. Advance payments are not considered a significant financing component as they are typically received less than one year before the related performance obligations are satisfied. These payments are treated as a contract liability and are classified in deferred revenue in the Consolidated Balance Sheets. Once control transfers to the customer and the Company meets the revenue recognition criteria, the deferred revenue is recognized in the Consolidated Statement of Operations. The deferred revenue relating to the annual maintenance service contracts is recognized in the Consolidated Statement of Operations on a straight line basis over the expected term of the contract.

Significant Judgments - Contracts with Multiple Performance Obligations

The Company enters into contracts with its customers that often include promises to transfer multiple products, parts, accessories, FPP and services. A performance obligation is a promise in a contract with a customer to transfer products or services that are distinct. Determining whether products and services are distinct performance obligations that should be accounted for separately or combined as one unit of accounting may require significant judgment.

Products, parts and accessories are distinct as such services are often sold separately. In determining whether FPP and service contracts are distinct, the Company considers the following factors for each FPP and services agreement: availability of the services from other vendors, the nature of the services, the timing of when the services contract was signed in comparison to the product delivery date and the contractual dependence of the product on the customer’s satisfaction with the professional services work. To date, the Company has concluded that all of the FPP and services contracts included in contracts with multiple performance obligations are distinct.

The Company allocates the transaction price to each performance obligation on a relative standalone selling price (“SSP”) basis. The SSP is the price at which the Company would sell a promised product or service separately to a customer. Judgment is required to determine the SSP for each distinct performance obligation.

The Company determines SSP by considering its overall pricing objectives and market conditions. Significant pricing practices taken into consideration include the Company’s discounting practices, the size and volume of the Company’s transactions, the customer demographic, the geographic area where systems and services are sold, price lists, its go-to-market strategy, historical sales and contract prices. The determination of SSP is made through consultation with and approval by the Company’s management, taking into consideration the go-to-market strategy. As the Company’s go-to-market strategies evolve, the Company may modify its pricing practices in the future, which could result in changes to SSP.

In certain cases, the Company is able to establish SSP based on observable prices of products or services sold separately in comparable circumstances to similar customers. The Company uses a single amount to estimate SSP when it has observable prices.

If SSP is not directly observable, for example when pricing is highly variable, the Company uses a range of SSP. The Company determines the SSP range using information that may include market conditions or other observable inputs. The Company typically has more than one SSP for individual products and services due to the stratification of those products and services by customer size and geography.

Unsatisfied Performance Obligations

The Company has elected the practical expedient to disclose only the value of unsatisfied performance obligations for contracts with an original expected length greater than one year. The majority of the Company’s revenues resulted from sales of inventoried systems with short periods of manufacture and delivery and thus are excluded from this disclosure.

As of March 31, 2021, the FPP backlog was approximately $75.1 million, which represents the value of the contractual agreement for FPP services that has not been earned and extends through Fiscal 2041.

Practical Expedients

We apply a practical expedient to expense costs as incurred for costs to obtain a contract when the amortization period would have been one year or less. These costs are recorded within sales and marketing expenses.

Warranty

Warranty  The Company provides for the estimated costs of warranties at the time revenue is recognized. The specific terms and conditions of those warranties vary depending upon the product sold and geography of sale. The Company’s product warranties generally start from the delivery date and continue for up to twenty-four months. Factors that affect the Company’s warranty obligation include product failure rates, anticipated hours of product operations and costs of repair or replacement in correcting product failures. These factors are estimates that may change based on new information that becomes available each period. Similarly, the Company also accrues the estimated costs to address reliability repairs on products no longer in warranty when, in the Company’s judgment, and in accordance with a specific plan developed by the Company, it is prudent to provide such repairs. The Company assesses the adequacy of recorded warranty liabilities quarterly and makes adjustments to the liability as necessary. When the Company has sufficient evidence that product changes are altering the historical failure occurrence rates, the impact of such changes is then taken into account in estimating future warranty liabilities.

Research and Development ("R&D")

Research and Development (“R&D”)  The Company accounts for grant distributions and development funding as offsets to R&D expenses and both are recorded as the related costs are incurred. There were no offsets to R&D during Fiscal 2021 and 2020.

Income Taxes

Income Taxes  Deferred income tax assets and liabilities are computed for differences between the consolidated financial statement and income tax basis of assets and liabilities. Such deferred income tax asset and liability computations are based on enacted tax laws and rates applicable to periods in which the differences are expected to reverse. Valuation allowances are established, when necessary, to reduce deferred income tax assets to the amounts expected to be realized.

ASC Topic 740-10, Income Taxes, clarifies the accounting for uncertainty in income taxes recognized in our financial statements in accordance with accounting principles generally accepted in the United States of America, or GAAP. Income tax positions must meet a more-likely-than-not recognition threshold to be recognized. Income tax positions that previously failed to meet the more-likely-than-not threshold are recognized in the first subsequent financial reporting period in which that threshold is met. Previously recognized tax potions that no longer meet the more-likely-than-not threshold are derecognized in the first subsequent financial reporting period in which that threshold is no longer met. Our policy is to recognize interest and penalties accrued on any unrecognized tax benefits as interest and other expense, net in the statements of operations.

Contingencies

Contingencies  The Company records an estimated loss from a loss contingency when information available prior to issuance of its financial statements indicates that it is probable that an asset has been impaired or a liability has been incurred at the date of the financial statements and the amount of the loss can be reasonably estimated.

Risk Concentrations

Risk Concentrations  Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of cash and cash equivalents and accounts receivable. At March 31, 2021, the majority of our cash balances were held at financial institutions located in California. The accounts at these institutions are insured by the Federal Deposit Insurance Corporation up to certain limits. Balances that exceed the insurance coverage aggregate to approximately $48.6 million as of March 31, 2021. The Company places its cash and cash equivalents with high credit quality institutions. The Company performs ongoing credit evaluations of its customers and maintains an allowance for potential credit losses.

Sales to CAL and E‑Finity accounted for 15% and 12%, respectively, of the Company’s revenue for Fiscal 2021. Sales to E-Finity accounted for 12% of Company’s revenue for Fiscal 2020. Additionally, E-Finity accounted for 13% and 14% of net accounts receivable as of March 31, 2021 and March 31, 2020, respectively.

The Company recorded net bad debt recovery of $0.2 million and net bad debt expense of $0.4 million for Fiscal 2021 and 2020, respectively.

Certain components of the Company’s products are available from a limited number of suppliers. An interruption in supply could cause a delay in manufacturing, which would affect operating results adversely.

Estimates and Assumptions

Estimates and Assumptions  The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make certain estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Significant estimates include accounting for accounts receivable allowances, stock‑based compensation, inventory write‑downs, valuation of long‑lived assets including intangible assets with finite lives, product warranties, income taxes and other contingencies. Actual results could differ from those estimates.

Net Loss Per Common Share

Net Loss Per Common Share  Basic loss per common share is computed using the weighted‑average number of common shares outstanding for the period. Diluted loss per share is also computed without consideration to potentially dilutive instruments because the Company incurred losses which would make such instruments antidilutive. Outstanding stock options and restricted stock units at March 31, 2021 and 2020 were 0.5 million and 0.3 million, respectively. As of March 31, 2021 and 2020, the number of warrants excluded from diluted net loss per common share computations was approximately 1.1 million and 1.5 million, respectively.

Stock-Based Compensation

Stock‑Based Compensation  Options or stock awards are recorded at their estimated fair value at the measurement date. The Company recognizes compensation cost for options and stock awards that have a graded vesting schedule on a straight‑line basis over the requisite service period for the entire award.

Leases

Leases  Effective April 1, 2019, the Company accounts for its leases under ASC 842, Leases. Under this guidance, arrangements meeting the definition of a lease are classified as operating or financing leases and are recorded on the consolidated balance sheet as both a right of use asset and lease liability, calculated by discounting fixed lease payments over the lease term at the rate implicit in the lease or the Company’s incremental borrowing rate. Lease liabilities are increased by interest and reduced by payments each period, and the right of use asset is amortized over the lease term. For operating leases, interest on the lease liability and the amortization of the right of use asset result in straight-line rent expense over the lease term.

In calculating the right of use asset and lease liability, the Company elects to combine lease and non-lease components. The Company excludes short-term leases having initial terms of 12 months or less from the new guidance as an accounting policy election and recognizes rent expense on a straight-line basis over the lease term.

Reverse Stock Split

Reverse Stock Split  At the annual meeting of stockholders of the Company held on August 29, 2019, the Company’s stockholders approved an amendment to the Company’s Second Amended and Restated Certificate of Incorporation (the “Amendment”) to effect a reverse stock split of the Company’s common stock, $0.001 par value per share (“Common Stock”) at a ratio in the range of one-for-five (1:5) to one-for-ten (1:10). Pursuant to such authority granted by the stockholders, the Company’s Board of Directors (the “Board”) approved a one-for-ten (1:10) reverse stock split (the “Reverse Stock Split”) of the Common Stock and the filing of the Amendment. The Certificate of Amendment was filed with the Secretary of State of Delaware, effective on October 21, 2019 and the Reverse Stock Split became effective as of that date. Accordingly, all references to numbers of shares of Common Stock, including the number of shares of Common Stock on an as-if-converted basis, per-share data and share prices and exercise prices in the accompanying condensed consolidated financial statements have been adjusted to reflect the reverse stock split on a retroactive basis.

Evaluation of Ability to Maintain Current Level of Operations

Evaluation of Ability to Maintain Current Level of Operations  In connection with the preparation of these consolidated financial statements for Fiscal 2021, management evaluated whether there were conditions and events, considered in the aggregate, that raised substantial doubt about the Company’s ability to meet its obligations as they became due over the next twelve months from the date of issuance of the Company’s Fiscal 2021 consolidated financial statements. Management assessed that there were such conditions and events, including a history of recurring operating losses, negative cash flows from operating activities, the continued impact of the COVID-19 pandemic, volatility of the global oil and gas markets, a strong U.S. dollar in certain markets making its products more expensive in such markets and ongoing global geopolitical tensions. The Company incurred a net loss of $18.4 million and provided cash from operating activities of $1.7 million during Fiscal 2021. The Company’s working capital requirements during Fiscal 2021 were in-line with management’s expectations, which included reductions in inventory and accounts payable primarily due our lower revenue levels. The Company’s net loss improved during Fiscal 2021 primarily due to reduced overhead and operating expenses resulting from the Company’s COVID-19 Business Continuity Plan described below, as well as reduced FPP costs as the Company’s reliability improved due to the reduced impact of the part defect from a supplier first identified during the first quarter of Fiscal 2019. As of March 31, 2021, the Company had cash and cash equivalents of $49.5 million, and outstanding debt of $51.0 million at fair value (see Note 11–Term Note Payable for further discussion of the outstanding debt).

Management evaluated these conditions in relation to the Company’s ability to meet its obligations as they become due over the next twelve months from the date of issuance of these consolidated financial statements. The Company’s ability to continue current operations and to execute on managements plan is dependent on its ability to generate sufficient cash flows from operations. Management believes that the Company will continue to make progress on its path to profitability by continuing to maintain low operating expenses and develop its geographical and vertical markets. The Company may seek to raise funds by selling additional securities (through the at-the-market offering or otherwise) to the public or to selected investors or by obtaining additional debt financing. There is no assurance that the Company will be able to obtain additional funds on commercially favorable terms or at all. If the Company raises additional funds by issuing additional equity or convertible debt securities, the fully diluted ownership percentages of existing stockholders will be reduced. In addition, any equity or debt securities that the Company would issue may include rights, preferences or privileges senior to those of the holders of its common stock.

Based on the Company’s current operating plan, management anticipates that, given current working capital levels, current financial projections and funds received under debt agreements as further described in Note 11-Term Note Payable, the Company will be able to meet its financial obligations as they become due over at least the next twelve months from the date of issuance of the Company’s Fiscal 2021 consolidated financial statements.

Company Response to COVID-19

Company Response to COVID-19

In March 2020, the Company began to monitor the global effects of COVID-19, the worldwide spread of which led the World Health Organization (“WHO”) to characterize it as a pandemic on March 11, 2020. Thereafter, most U.S. states imposed “stay-at-home” orders on their populations to stem the spread of COVID-19. Of specific interest to the Company, stay-at-home orders were imposed in the state of California on March 20, 2020.

On March 23, 2020 the Company enacted a Business Continuity Plan in response to COVID-19. Beginning March 30, 2020, the Company furloughed 52 employees, leaving behind only staff deemed essential for day-to-day administrative operations for a minimum period of 45 days. The Company’s Leadership Team volunteered to take a 25% temporary salary cut. In addition, 25 other top Company managers volunteered to take a similar 15% reduction in salary. Several employees returned to work June 1, 2020, most with the 15% voluntary salary cuts, with others returning in a staggered manner through the end of September 2020. Additionally, in March 2020, the Board voted to take a temporary 25% reduction in base cash retainer in support of the Company’s Business Continuity Plan. As a result of the continued global economic slowdown due to COVID-19 and the associated decline in global crude oil prices, the Company eliminated 26 positions on June 1, 2020. During the period of March 30, 2020 to June 1, 2020, the Company had limited production capability of new microturbine products, but had pre-built approximately 5.9 MW of microturbine finished goods during March 2020 for shipment during this period of suspended production. On September 28, 2020 salaries were returned to 100% and remaining furloughed employees returned to work. The Company’s vendor supply chain has also been impacted by the pandemic; however, the Company has been able to maintain sufficient supply flow to continue operations.

Segment Reporting

Segment Reporting  The Company is considered to be a single reporting segment. The business activities of this reporting segment are the development, manufacture and sale of turbine generator sets and their related parts and service. Following is the geographic revenue information based on the primary operating location of the Company’s customers (in thousands):

 

 

 

 

 

 

 

 

 

Year Ended March 31,

 

    

2021

    

2020

United States

 

$

32,502

 

$

31,082

Mexico

 

 

3,931

 

 

2,361

All other North America

 

 

321

 

 

1,145

Total North America

 

 

36,754

 

 

34,588

Russia

 

 

3,577

 

 

3,653

All other Europe

 

 

13,659

 

 

12,858

Total Europe

 

 

17,236

 

 

16,511

Asia

 

 

6,087

 

 

4,074

Australia

 

 

3,165

 

 

4,559

All other

 

 

4,394

 

 

9,194

Total Revenue

 

$

67,636

 

$

68,926

 

The following table summarizes the Company’s revenue by product (in thousands):

 

 

 

 

 

 

 

 

 

Year Ended March 31,

 

    

2021

    

2020

C30

 

$

1,607

 

$

1,518

C65

 

 

10,756

 

 

9,366

C200

 

 

3,603

 

 

3,880

C600

 

 

7,913

 

 

7,204

C800

 

 

3,069

 

 

3,253

C1000

 

 

7,173

 

 

8,340

Unit upgrades

 

 

 —

 

 

229

Microturbine Products

 

$

34,121

 

$

33,790

Accessories

 

 

2,396

 

 

1,548

Total Product and Accessories

 

 

36,517

 

 

35,338

Parts and Service

 

 

31,119

 

 

33,588

Total Revenue

 

$

67,636

 

$

68,926

 

Substantially all of the Company’s operating assets are in the United States.

Impact of Recently Issued Accounting Standards

Impact of Recently Issued Accounting Standards  

Not yet adopted

In December 2019, the FASB issued ASU 2019-12, Income Taxes (Topic 740), Simplifying the Accounting for Income Taxes. The new guidance removes certain exceptions to the general principles of ASC 740 in order to simplify the complexities of its application. These changes include eliminations to the exceptions for intraperiod tax allocation, recognizing deferred tax liabilities related to outside basis differences, and year-to-date losses in interim periods, among others. The effective date of this guidance for public companies is for fiscal years, and interim period within those fiscal years, beginning after December 15, 2020. The Company does not anticipate the adoption will have a material impact on its financial statements

Management considers the applicability and impact of all Accounting Standards Updates (“ASUs”). The ASUs not listed were assessed and determined by management to be either not applicable or are expected to have minimal impact on our consolidated financial position and/or results of operations.